The company is located in the southwest of Chongqing and is the most extensive ventilation production base in the southwest region. It is the foundry of many world fan brands and supports various customized services. Main products: industrial ceiling fans, mobile fans, wall-mounted fans, new column fans, and water-cooled air conditioners.
By JU LAI | 04 July 2023 | 0 Comments

How do you ensure your industrial fans are properly balanced?

  1. Turn off the Fan: Before attempting any balancing, make sure the fan is completely turned off and has come to a complete stop. This ensures your safety during the balancing process.

  2. Inspect the Blades: Perform a visual inspection of the fan blades to check for any obvious signs of damage, such as cracks or chips. Damaged blades may need to be replaced before balancing can be effective.

  3. Clean the Blades: Remove any dust, debris, or buildup from the fan blades. A clean surface allows for more accurate balancing.

  4. Identify the Heavy Spot: Determine the heavy spot on the fan blades. This can be done by lightly tapping each blade with a soft mallet or by observing the blades' natural resting position when laid flat. The blade that consistently rests in a lower position is likely the heaviest.

  5. Attach Balancing Clips or Weights: Balancing clips or weights are typically provided with the fan or can be purchased separately. Attach the balancing clips or weights to the lighter side of the blade opposite to the heavy spot. Start with a single clip or weight and test the fan's operation.

  6. Test and Observe: Turn on the fan and observe its operation. If the fan still exhibits noticeable vibrations or wobbling, add or adjust the balancing clips/weights accordingly. Continue testing and adjusting until the fan operates smoothly and without excessive vibration.

  7. Fine-tune the Balancing: For more precise balancing, you can use a handheld vibration meter to measure the vibration levels at various speeds. Make adjustments based on these measurements to achieve the desired balance.

  8. Repeat for Each Blade: Repeat the balancing process for each blade of the fan. It's essential to ensure that all blades are balanced individually and equally to achieve overall fan balance.

  9. Periodic Maintenance: Industrial fans may require periodic re-balancing due to normal wear and tear or changes in operating conditions. Regularly inspect the fan's balance and perform any necessary adjustments or maintenance as needed.

Leave a Reply

Your email address will not be published.Required fields are marked. *
Verification code